This SuperBooster pack includes two 2.4 bar, single ended, universal (negative head) pumps from the Right Pump range. The pumps can be used to 'split' a pumped installation, with one pump used to boost the cold water pressure and the other to boost the hot water pressure.

Brand Name	Salamander Pumps
Colour	N/A
Material	N/A
Manufacturer Model No	N/A
Wear Type	N/A
Type	Shower Pump
Certifications Met	WRAS approved
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Pump Type	Centrifugal
Noise	52dBA
Mechanical Seal	Nitrile/Carbon/Ceramic
Anti-vibration feet	Yes
Inlet isolators	Yes
Flexible Hoses	4
Pressure @ closed head	2.4 bar
Pressure @ 8lpm	2.3 bar
Pressure @ 16lpm	2.1 bar
Maximum water Temperature	60 C
Pump connections	3/4" BSP
Pressure vessel air pre-charge	14 psi
Hose connections (UK model)	3/4" female x 22 mm push-fit x 280 mm long, isolating valves on all hoses
Motor type	A.C Induction Motor
Power supply	230V
Current (full load)	1.71 amps
Power consumption	393 watts
Fuse rating	3 Amps
Power cable (pre-wired)	1.5 metres
Enclosure protection (IP rating)	IPX2
Length	273 mm
Width	143 mm
Height (Excluding hoses)	317 mm
Weight (Excluding hoses)	6.55 kg
EAN	5055070819613
Head Type	Universal
Impeller Type	Single
Pressure Rating	2.4 Bar
SKU	RP80SU SB

The Salamander RP80SU is from a range of premium pumps designed for smooth running with high levels of flow to boost pressure to appliances throughout the home. This premium 2.4 bar single ended pump will quietly and efficiently boost the hot or cold water supplies to your shower, wash basin, bath and kitchen taps in a negative head or positive head gravity fed installation.

Brand Name	Salamander
Colour	N/A
Material	N/A
Manufacturer Model No	RP80SU
Wear Type	N/A
Type	Shower Pump
Certifications Met	N/A
Country of Origin	Britain
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Pump Type	Centrifugal
Noise	52dBA
Mechanical Seal	Nitrile/Carbon/Ceramic
Pressure @ Closed Head	2.4 bar
Pressure @ 8lpm	2.3 bar
Pressure @ 16lpm	2.1 bar
Maximum water Temperature	60 C
Pump Connections	3/4" BSP
Pressure Vessel Air Pre-Charge	14psi
Hose Connections (UK Model)	3/4" female x 22mm push-fit x 280mm long, isolating valves on all hoses
Motor Type	A.C Induction
Motor Duty Rating	Continuously rated
Power Supply	230V
Current (Full Load)	1.71 amps
Power Consumption	393 watts
Fuse Rating	3 Amps
Power Cable (Pre-wired)	1.5 metres
Enclosure Protection (IP rating)	IPX2
Length	273mm
Width	143mm
Height (Excluding Hoses)	317mm
Weight (Excluding Hoses)	6.55kg