Brand Name	Cuprinol
Colour	Brown
Material	None
Manufacturer Model No	5092617
Wear Type	None
Type	Decking Stain
Certifications Met	None
Country of Origin	None
Protects From	mould growth
Waterproof	Yes
Number of Pockets	None
Pack Size	Each
Volume	2.5L
Interior / Exterior Use	Exterior Use

Brand Name	Cuprinol
Colour	Boston teak
Material	Wood
Finish	Matt
Location	Exterior
Base	Water-based
Volume	2500ml
Coverage	8m ²
Drying time	2-6 h
Application method	Brush or roller
Product code	5010212519660

Brand Name	Cuprinol
Colour	Boston Teak
Material	N/A
Manufacturer Model No	HA159915J_579205
Wear Type	N/A
Type	Decking Stain
Certifications Met	N/A
Country of Origin	N/A
Protects From	N/A
Waterproof	N/A
Number of Pockets	N/A
Size	2.5L
Application Methods	Brush
Coverage	Up to 16sq/m per litre
VOC level	Low
Thinning	Do not thin
Touch dry	1-4 hours
Scrubbability	Washable
Finish	Matt
Cleanup	Water & Detergent

Cuprinol Anti Slip Decking Stain offers a rich semi-transparent colour with a tough durable finish. It has a unique double action formulation which has invisible anti-slip microbeads to make decks safer than untreated wood and an algicide to help protect the film surface from green algae and mould growth.

Brand Name	Cuprinol
Colour	semi-transparent
Material	Wood
Manufacturer Model No	N/A
Wear Type	N/A
Type	Decking Stain
Certifications Met	N/A
Country of Origin	N/A
Protects From	green algae and mould growth
Waterproof	N/A
Number of Pockets	N/A
Product Type	Wood Stain
Short Description	Rich colour and protection for wooden decking
Drying time (recoat)	2-6 hours
Drying time (touch dry)	2-6 hours
Suitable Surface	Wood
Coverage	The 2.5L can covers up to 20m2 with 2 coats on bare or previously stained wood.Absorbent wood,rough sawn wood and grooved decking will reduce coverage
General No. of Coats	2
Application description	Stir thoroughly before use. Final colour will depend upon wood type, previous treatment and the number of coats applied. Apply 2-3 coats evenly along the grain, avoiding overlaps. When applying subsequent coats, allow each coat to dry fully before recoating. Avoid heavy wear and tear for a few days after application. On previously stained decking, touch up bare areas and allow to dry before finishing with further coats. Do not apply in temperatures below 5C, in damp conditions or if rain is likely before the product has dried. If using more than one can it is advisable to mix them together in a larger container or finish in a corner before starting a new can.
Cleaning	Remove as much stain as possible from brushes and rollers before cleaning with water
Storage	Do not use or store in extremes of temperature or wet conditions
Disposal	Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk